User Tools

Site Tools


av_manual:device_configuration

Configuring the device

An Active Track device can be configured in two ways: by using a set of AGP3 cables or by sending text message to the device's card number.

You can watch the video presenting how to configure the Active Track device:

How to configure the Active Track device

Upload device setting by mobile phone

Insert SIM card without PIN CODE to charged device then send text to it.

Example of message: 1111 SERVER=94.42.165.180 PORT=7407 APN=internet KILL

NOTE: APN depends on GSM provider. SIM card must have credit to connect server by GPRS.

Upload setting by GPRS transmitter configurator

  • Download GPRS transmitter configurator from http://www.ebs.com.pl/logowanie/ login: ebs password: ebs
  • Link device to PC like below. Panic button should flashing. Use AGP3 set plus RS232/USB adapter.

  • Find the Serial Port number.

  • Set up the Serial Port in GPRS transmitter configurator.

  • File out the Server address, Port and APN then press red arrow.

  • Unplug adapter with cable. Insert SIM card. Remember to change PIN Code or remove it.
av_manual/device_configuration.txt · Last modified: 10:50 29.11.2016 (external edit)